မေႃႇၵျူး:Sandbox/Matroc/Inapoly
ၽိုၼ်ၵႅမ်မိုဝ်းဢၼ်ၼႆႉ ပဵၼ်ဢၼ်ၶဝ်ႈပႃးမႃးတီႈ မေႃႇၵျူး:Sandbox/Matroc/Inapoly/doc။ (မႄးထတ်း | ပိုၼ်း)
ၶေႃႈၽၢင်ႉ တႃႈ ၽူႈမႄးထတ်းၶဝ် - Please don't categorize this template by editing it directly. Instead, place the category in its documentation page, in its "includeonly" section.
ၶေႃႈၽၢင်ႉ တႃႈ ၽူႈမႄးထတ်းၶဝ် - Please don't categorize this template by editing it directly. Instead, place the category in its documentation page, in its "includeonly" section.
- Inapoly is a test module to see if a position is located within a polygon (shape). This was presented to me as an issue by a fellow user on hewikivoyage that has list of positions and needed to select those that fit within a polygon area -- Matroc
- After researching and looking at Python, MatLab, Lua, C++ and Math examples to determine if a point is located within a polygon. I resorted to convertng them (most are very similar) in order to create this Module. As this is experimental and not fully vetted user beware.
- Not for production use - Should only be used in a Sandbox as a tool or aid...
- Functions
- function pointinpoly - main entry point when invoking module inapoly
- internal local function inapoly - function to compare positions and shape provided
- internal local function grabmaskinpoly - attempts to retrieve a Mapmask from a page
- internal local function grabmarkerpoly - attempts to retrieve markers and see listing from a page
- internal local function getwdcoords - attempts to retrieve latitude/longitude via Wikidata if need be
- internal local function t1_load - loads table Regions which contains formatted polygons (shapes)
- internal local function newlat - reworks latitude for map
- internal local function box - creates a box polygon (shape)
- Parameters
- poly --- Minimum of 3 decimal combinations of latitude and longitude in the form 'lat:long" -- each set separated by a comma.
- 32.932:35.097, 32.909:35.653, 33.293:35.572,32.932:35.097 -- note the first and last are the same... Much larger polygon (shapes) can be entered and used.
- or enter GeoJSON format such as "[[[-140.000000,53.435182],[-150.392305,62.866762],[-129.607695,62.866762],[-140.000000,53.435182]]],". Module will check to see if it begins with a "[" it will be processed and lat/long positions will be reversed.
- table -- Can be used instead of poly and mapmaskpage (below). Preformatted olygons (shapes) in Module:Sanbox/Matroc/Regions table... table=Negev... the table itself is fixed/set and table in this case means which array member to get.
- note: -- This may change to allow for loading other tables and a lukfor parameter to be introduced...
- mapmaskpage -- Can be used instead of poly and table. This will attempt to take a page and extract and use the Mapmask template for the polygon shape. ie.mapmask=Brooklyn/South.
- Be aware -- The time allocated for running scripts has expired. error message may appear. Let me know if you get any of this type of error and I will examine. (One case I experienced was resolved by replacing {{ and }} around a mapmask - these characters may have been entered with a different style keyboard.
- makebox -- Can be use instead of poly,table and mapmaskpage just for fun... Consists of a latitude and longitude separated by a comma ie. makebox=42.81958,-74.73999 will create a mapmask in the shape of a box in (New York (state) (width and height of approx. 35 kms.
- Notes: -- Order of precedence -- poly, table, mapmaskpage then makebox - other wise an error may possibly occur...
- Following can be used for a single check against a polygon (shape) only
- name --- name of place optional ie. name=Baram Synagogue
- lat ---- decimal latitude ie. latitude=30.932
- long --- decimal latitude ie. longitude=35.932
- wikidata - wikidata id ie. wikidata=Qnnnn
- Example:
{{#invoke:Sandbox/Matroc/Inapoly|pointinpoly|poly=32.932:35.097, 32.909:35.653, 33.293:35.572,32.932:35.097|lat=32.989 | long=35.389 | wikidata=Q668}} - Following can be used to perform multiple checks - multiple checks override any single check (name,lat,long,wikidata combo),,,
- multi -- Container parameter for multiple checks only - contains 4 subfields for name, latitude, longitude and wikidata -- these can be entered by hand and have to be in the following order: @nname@alatitude@blongitude@wwikidata ID - groupings are separated by a :.
- @n --- name -------- @nName
- @a --- latitude----- @a32.98
- @b --- longitude --- @b34.23
- @w --- wikidata ID - @wQnnnnn
- Example: multi=@nSomewhere@a33.04290@b35.41458@wQ000110 (can be used for one) -- multi=@nMontfort Castle@a33.0443627@b35.2266088@wQnnnn:@nBaram synagogue@a33.04290@b35.41458@wnnn:@nBeit Shemesh@a31.751389@b34.988611@wQnnnn -- if latitude and longitude will attempt to retrieve using the wikidata ID -- Remember too many can be expensive and cause issues.
- markerpage - Can be used instead of multi to grab markers and optional listings from an article page and create multiple checks markerpage=Jerusalem. These will be used to create simple markers as output.
- types -- parameter to use with markerpage - enter types separated by a , ie. types=see,buy,go - an attempt to include these listings for checking against a polygon (shape) will be made.
- Parameters controlling output
- mapframe' ----- defaul is no - to output a mapframe and a mapmask with markers if marker=yes and takes markermatch parameter into consideration - especially if you only want to see matches, non-matches or both on a map.
- If you already have a mapframe and mapmask on your test page then I would opt out of using mapframe=yes and add show=listing,vicinity,mask to your existing mapframe -- if using oporigtype then you may have to add other types to the show parameter...
- marker ------- yes or no -- to output simple markers - default is yes ...
- markermatch -- yes or no or both - output (simple markers) matches, non-matches or both if marker=yes and markermatch parameter is set ... - default is both.
- text --------- default is no .. textual explanation of matches and non-matches - if marker=yes and text=yes and markermatch=yes, no or both then markers and text will be output accordingly. If marker=no and text=yes then text will be output.
- sort ---------- default is no - rudimentary sort (English) of shortened markers being created ..
- oporigtype ---- default is no - options are yes,no or both - This should retain the original type for display on the mapframe ..
- poly --- Minimum of 3 decimal combinations of latitude and longitude in the form 'lat:long" -- each set separated by a comma.
- Examples:
- Single check:
{{#invoke:Sandbox/Matroc/Inapoly|pointinpoly|poly=32.932:35.097, 32.909:35.653, 33.293:35.572,32.932:35.097|lat=32.989 | long=35.389}} - Multiple check
{{#invoke:Sandbox/Matroc/Inapoly|pointinpoly|poly=33.293:35.567,33.244:35.699,32.887:35.630,32.925:35.105,33.094:35.126,33.096:35.457,33.293:35.567| multi=@nMontfort Castle@a33.0443627@b35.2266088:@nBaram synagogue@a33.04290@b35.41458:@n[[Sandbox/Matroc/Inapoly/Beit Shemesh|Beit Shemesh]]@a31.751389@b34.988611}}{{safesubst:#invoke:Sandbox/Matroc/Inapoly|pointinpoly|marker=yes|mapframe=yes|markermatch=both|markerpage=Israel|mapmaskpage=Judaean Desert|sort=yes}}
- Single check:
- Notes:
- The use of safesubst: while using the wiki editor you can preview the output and work with parameters to change/reuse it. Once you save/publish - results are finalized and the call to the Module will disappear. safesubst allows the module to do its job prior to processing templates and other processes first. If you do not use safesubst you will see the textual output and if saved or published you will only see textual output. Be sure and copy the module template call to #invoke a module in case you need it again!
- At times it may be necessary to actually save/publish the Sandbox page and purge the page. You can then reenter wiki editor and experiment some more reusing a copy of the module template call.
- Simple markers are output as 2 types - listing and vicinity (listing=green=match / vicinity=maroon=non-match)
- Issues may arise due to the difficulty of text-processing a page to get markers/listings and mapmask. There are multiple variations of how and what templates etc. do and the many oddities that were input by editors not following any standard method of entering them.
- This is designed as a tool and not really for production. Play safe and use in a Sandbox! -- Have fun! -- Matroc (talk) 04:55, 26 September 2018 (UTC)
local p = {}
-- Having worked further on similar processes - the code here can be dropped by at least 30% in size and further simplified
-- Methods used though sound and working are clumsy -- furture work project
-- Examole
-- {{#invoke:Inpoly|pointinpoly|poly=32.932:35.097, 32.909:35.653, 33.293:35.572, 32.932:35.097|lat=42.989 | long=35.389}}
-- function needed to correct lat positioning
local function newlat(a)
newlatitude = 180/math.pi * (2 * math.atan(math.exp( a * math.pi/180)) - math.pi/2 )
if newlatitude > 89.5 then point = 89.5 end -- END if
if newlatitude < -89.5 then point = -89.5 end -- END if
return newlatitude
end
-- Makes a box as a marker for inclusion on a map
local function box(makebox)
local makebox = makebox
if makebox == nil or makebox == "" then
return "" end
makebox = string.gsub(makebox,"%s*","")
local lat = string.gsub(makebox,",.*","")
local long = string.gsub(makebox,".*,","")
if lat == nil or lat == "" then return "" end
if long == nil or long == "" then return "" end
local coordinates = ""
local r = ".25"
if tonumber(lat) > 90 or tonumber(lat) < -90 then
return "" end
if tonumber(long) > 180 or tonumber(long) < -180 then
return "" end
r = tonumber(r)
lat = math.log(math.tan((90 + lat) * math.pi/360)) / (math.pi/180)
local angle1,angle2,angle3,angle4 = 0,0,0,0
local ptx,ptx2,ptx3,ptx4 = 0,0,0,0
local pty,pty2,pty3,pty4 = 0,0,0,0
local a = 45
local b = 135
local c = 225
local d = 315
angle1 = a * math.pi / 180
ptx = lat + r * math.cos( angle1 )
pty = long + r * math.sin( angle1 )
angle2 = b * math.pi /180
ptx2 = lat + r * math.cos( angle2 )
pty2 = long + r * math.sin( angle2 )
angle3 = c * math.pi /180
ptx3 = lat + r * math.cos( angle3 )
pty3 = long + r * math.sin( angle3 )
angle4 = d * math.pi /180
ptx4 = lat + r * math.cos( angle4 )
pty4 = long + r * math.sin( angle4 )
ptx,pty = string.format("%.6f",newlat(ptx)),string.format("%.6f",pty)
ptx2,pty2 = string.format("%.6f",newlat(ptx2)),string.format("%.6f",pty2)
ptx3,pty3 = string.format("%.6f",newlat(ptx3)),string.format("%.6f",pty3)
ptx4,pty4 = string.format("%.6f",newlat(ptx4)),string.format("%.6f",pty4)
coordinates = "[[[" .. pty .. "," .. ptx .. "],[" .. pty2 .. "," .. ptx2 .. "],[" .. pty3 .. "," .. ptx3 .. "],[".. pty4 .. "," .. ptx4 .. "],[" .. pty .. "," .. ptx .. "],[" .. pty .. "," .. ptx .. "]]]"
return coordinates
end
-- grab a mapmask if possible from a wv article page and convert to a poly if asked for
function grabmapmaskinpoly(mapmaskpage)
local page = mapmaskpage or ""
local xoutput = ""
local title = mw.title.new(page)
local newdata = ""
if title == nil then return end
if title.id == 0 then
return error(mapmaskpage .. "No such page for '''mapmaskpage''' exists!")
end
newdata = title:getContent()
if newdata == nil or newdata == "" or not newdata == true then
return ""
end
if string.find(newdata,"{{%s*[Mm]apmask") == nil then
return error("'''No MAPMASK''' found on page " .. mapmaskpage .."!")
end
newdata = string.gsub(newdata,"^.*%{%{%s*[Mm]apmask","")
newdata = string.gsub(newdata,"%s*}}.*","")
newdata = string.gsub(newdata,"%s*=%s*","=")
newdata = string.gsub(newdata,"|%s*%a+=","@D")
-- beginit,endit = string.find(newdata,"|")
newdata = string.gsub(newdata, "%s*|%s*", "@x", 1)
newdata = string.gsub(newdata,"@D.*@x","@x")
newdata = string.gsub(newdata,"@D.*$","")
newdata = string.gsub(newdata,"^@x","")
newdata = string.gsub(newdata,",",":")
newdata = string.gsub(newdata,"|",",")
newdata = string.gsub(newdata,"%s*","")
return newdata -- becomes poly for searching if available
end
-- read in a page with title:getcontent() and try and get markers - can be expensive processing wise
-- included are not only '''markers''' but '''See''' listings
function grabmarkerinpoly(markerpage,types)
-- local copytype = ""
local separator = ","
local page = markerpage or ""
local types = types or ""
local xoutput = ""
local title = mw.title.new(page)
local newdata = ""
if title == nil then return end
if title.id == 0 then
return error("'''" .. markerpage .. "''' does not exist")
end
newdata = title:getContent()
if newdata == nil or newdata == "" or not newdata == true then
return ""
end
newdata = string.gsub(newdata,"\n"," ")
newdata = string.gsub(newdata,"%{%{%s*[Ss]ee[Dd]istricts%s*%}%}","{{JUNK")
newdata = string.gsub(newdata,"%{%{%s*[Ss]ee%s*[Aa]lso%s*%}%}","JUNK")
newdata = string.gsub(newdata,"%{%{%s*[Ss]leeppricerange","{{JUNK")
newdata = string.gsub(newdata,"%{%{%s*[Ee]atpricerange","{{JUNK")
newdata = string.gsub(newdata,"\n","")
newdata = string.gsub(newdata,"\r","")
newdata = string.gsub(newdata,"@","BULLET")
newdata = string.gsub(newdata,"%{%{%{","BEGINTRIPLE")
newdata = string.gsub(newdata,"}}}","ENDTRIPLE")
newdata = string.gsub(newdata,"%{%{dead link%|%a+ %d+%s*%}%}","") -- problem with this (internal curly brackets)
newdata = string.gsub(newdata,"%{%{dead link%|%a+ %d+|%a+ %d+%s*%}%}","") -- problem with this - see above
-- newdata = string.gsub(newdata,"%{%{%s*[Ss]eealso","{{other")
-- newdata = string.gsub(newdata,"%{%{%s*[Ss]ee also","{{other")
-- newdata = string.gsub(newdata,"%{%{%s*[Ss]ee","{{marker")
-- newdata = string.gsub(newdata,"(%{%{%s*listing%s*|%s*type%s*=%s*[sS]ee","{{marker|type=see")
if types ~= nil and types ~= "" then
types = string.gsub(types,"%s*","") -- listing,see,do,buy,eat,drink,sleep,go etc.
types = "," .. types
types = string.lower(types)
for zip in string.gmatch(types,"([^"..separator.."]+)") do
if zip == "listing" then
newdata = string.gsub(newdata,"%{%{%s*[Ll]isting%s*|%s*name=","{{marker|type=listing|name=")
else
copytype = zip
zip = "[" .. string.upper(string.sub(zip,1,1)) .. string.lower(string.sub(zip,1,1)) .. "]" .. string.sub(zip,2,15)
-- newdata = string.gsub(newdata,"%{%{%s*listing%s*|%s*type%s*=%s*" .. zip ,"{{marker|type=" .. copytype)
-- newdata = string.gsub(newdata,"%{%{%s*" .. zip,"{{marker|type=" .. copytype)
newdata = string.gsub(newdata,"%{%{%s*listing%s*|%s*type%s*=%s*" .. zip ,"{{marker|type=" .. copytype)
newdata = string.gsub(newdata,"%{%{%s*" .. zip .. "%s*|","{{marker|type=" .. copytype .. "|")
end
end
end
--if string.match(types,"@[Dd]o") ~= nil then
-- newdata = string.gsub(newdata,"%{%{%s*listing%s*|%s*type%s*=%s*[Dd]o","{{marker|type=do")
-- newdata = string.gsub(newdata,"%{%{%s*[Dd]o","{{marker|type=do")
--end
newdata = string.gsub(newdata,"/","SLASH")
newdata = string.gsub(newdata,":","COLON")
newdata = string.gsub(newdata,"%{%{%s*[Mm]arker","@@{{marker") -- add separator @@
newdata = string.gsub(newdata,"\n"," ")
if string.find(newdata,"{{%s*marker") == nil then
-- if string.find(newdata,"{{marker") == nil then
return error("No '''Markers''' found on page " .. markerpage)
end
local separator = "@@"
newdata = string.gsub(newdata,"@@@@","@@")
for str in string.gmatch(newdata,"([^"..separator.."]+)") do
if string.find(str,"^%{%{marker") ~= nil then
str = string.gsub(str,"(%{%{)(%s*IATA%s*)(|)(%s*%u+%s*)(}})","%2--%4")
str = string.gsub(str,"=%{%{","=opencurlyopencurly") -- internal template inside template
str = string.gsub(str,"}}%s*|","closecurlyclosecurly|")
str = string.gsub(str,"}}%s*}}","closecurlyclosecurly}}")
str = str.gsub(str,"}}.*","") -- short cut to chop off end might not work as expected
str = "@" .. str .. "@"
str = str.gsub(str,"= ","=")
str = str.gsub(str," =","=")
str = str.gsub(str,"name=","@n")
str = str.gsub(str,"lat=","@a")
str = str.gsub(str,"long=","@b")
str = str.gsub(str,"wikidata=","@w")
str = str.gsub(str,"wikipedia=","@D")
str = str.gsub(str,"zoom=","@D")
str = str.gsub(str,"type=","@t")
str = str.gsub(str,"url=","@D")
str = str.gsub(str,"lastedit=","@D")
str = str.gsub(str,"image=","@i")
str = str.gsub(str,"^@{{marker","@xmarker")
str = str.gsub(str,"phone=","@D")
str = str.gsub(str,"tollfree=","@D")
str = str.gsub(str,"price=","@D")
str = str.gsub(str,"fax=","@D")
str = str.gsub(str,"directions=","@D")
str = str.gsub(str,"alt=","@D")
str = str.gsub(str,"address=","@D")
str = str.gsub(str,"content","@D")
str = str.gsub(str,"hours=","@D")
str = str.gsub(str,"%s%s+"," ")
str = str.gsub(str,"%s@","@")
str = string.gsub(str,"%s*|%s*@","@")
str = string.gsub(str,"@$","")
if string.find(str,"@a") == nil then
str = str .. "@a1"
end
if string.find(str,"@b") == nil then
str = str .. "@b1"
end
if string.find(str,"@n") == nil then
str = string.gsub(str,"@a","@nMissing Name@a")
end
str = string.gsub(str,"@D%d+@","@")
str = string.gsub(str,"opencrly","{")
str = string.gsub(str,"closecurly","}")
xoutput = xoutput .. str .. ":"
end
end
xoutput = string.gsub(xoutput,":$","")
return xoutput
end
-- Work in Wikidata IDs for lat/long only if id present and no lat/long available
-- can be expensive if too many markers present
local function getwdcoords(a,b,c)
local a = a
local b = b
local id = c
id = string.gsub(id,"%s+","")
if string.match(id,"^[Qq]%d+$") == nil then return a,b,c end -- wrong format don't even try
if tostring(a) ~= "1" and tostring(b) ~= "1" then -- use lat long given rather than lookup Wikidata ID
return a,b,c
end
if id ~= nil and id ~= '' then
entity = mw.wikibase.getEntityObject(id)
end
if entity == nil then
a = a
b = b
end
local claims = entity.claims
if claims == nil then
a = a
b = b
end
if pcall(function () t =claims.P625 end ) then
if pcall(function () t =entity.claims.P625[1].mainsnak.datavalue.value.latitude end ) then
a = entity.claims.P625[1].mainsnak.datavalue.value.latitude
else a = a end
if pcall(function () t =entity.claims.P625[1].mainsnak.datavalue.value.longitude end ) then
b = entity.claims.P625[1].mainsnak.datavalue.value.longitude
else b = b end
end
return a,b,c
end
-- Load a table of mapshapes for tblukup if used -- already formatted
-- Table is Sandbox/Matroc/Regions - contains mostly shapes for Israel at this time
-- Can be cleaned or added to...
local function load_t1(t1,table2load)
if pcall(function()t1 = mw.loadData(table2load) end) then
return t1
else
error ("Unable to load table!")
end
end
-- Main Processing center for finding if a position is within or not within a polygon
local function inapoly(polyx,polyy,ptx,pty)
local answer = false
local polyx = polyx
local polyy = polyy
local j = #polyx
local ptx = ptx
local pty = pty
for i = 1, #polyx do
if (polyy[i] < pty and polyy[j] >= pty or polyy[j] < pty and polyy[i] >= pty) then
if (polyx[i] + ( pty - polyy[i] ) / (polyy[j] - polyy[i]) * (polyx[j] - polyx[i]) < ptx) then
answer = not answer
end
end
j = i;
end
return answer
end
-- Main entrance to Inapoly module -- Starts here
function p.pointinpoly(frame)
local sortit = {}
local sort = frame.args['sort'] or "no"
local oporigtype = frame.args['oporigtype'] or "none"
local keeptype = {}
keeptype[1] = "red"
local t1 = {} ---- local array for table1
local t1_loaded = 0 ---- NO TABLE 1 is NOT LOADED!
local table2load = "Module:Sandbox/Matroc/Regions" -- only table to use
local lukfor = frame.args['table'] or ""
local a,b,c = ""
local work = ""
local output = ""
local index = 1
local separator = ","
local separator2 = ":"
local separator3 = "@-@"
local mapframe = frame.args['mapframe'] or "no"
local map = ""
local shape = ""
local name = {}
name[1] = frame.args['name'] or "Missing Name Parameter"
local wikidata = {} -- addon
wikidata[1] = frame.args['wikidata'] or ""
-- local type = {} -- Future if different type output wanted in short marker
local images = {} -- Future if image to be output in short marker
local image = frame.args['image'] or ""
images[1] = image
-- local markertxt = "\n"
local markertxtyes = "\n"
local markertxtno = "\n"
local marker = frame.args['marker'] or "yes" -- Default to not output markers
local markermatch = frame.args['markermatch'] or "both"
local markerpage = frame.args['markerpage'] or ""
local types = frame.args['types'] or "" -- comma separated lis of listing types to treat as markers - listing,see,do,buy,eat,drink,sleep,go
local mapmaskpage = frame.args['mapmaskpage'] or ""
local text = frame.args['text'] or 'yes' -- Default to output textual output
local ptx = {} -- latitude
local pty = {} -- longitude
local polyx = {}
local polyy = {}
local result = false
local reverse = "no"
local poly = frame.args['poly'] or ""
local makebox = frame.args['makebox'] or ""
local dummy = "{{mapmask|group=mask|"
if poly == "" or poly == nil then
t1 = load_t1(t1,table2load)
if t1[lukfor] ~= nil then
poly = t1[lukfor]
shape = string.gsub(poly,",","|")
shape = string.gsub(shape,":",",")
shape = "{{mapmask|group=mask|" .. shape .. "}}"
else
poly = poly
reverse = "no"
end
if poly == "" or poly == nil then
if mapmaskpage ~= nil and mapmaskpage ~= "" then
poly = grabmapmaskinpoly(mapmaskpage)
shape = string.gsub(poly,",","|")
shape = string.gsub(shape,":",",")
shape = "{{mapmask|group=mask|" .. shape .. "}}"
else
poly = poly
reverse = "no"
end
end
end
if poly == nil or poly == "" then
if makebox ~= nil and makebox ~= "" then
poly = box(makebox)
else
poly = poly
end
end
poly = string.gsub(poly,"%s+","") or ""
poly = string.gsub(poly,"\n","")
if poly == nil or poly == "" then output = output .. "Empty parameter '''poly''' for marker comparison missing - use poly, table, mapmaskpage or makebox!\n"
return output
end
-- Check to see if polygon is in the form [[[-140.000000,53.435182],[-150.392305,62.866762],[-129.607695,62.866762],[-140.000000,53.435182]]]
-- Assumption the parameter begins with a "[" as trigger that it is from Mapframe or Maplink. - If so reverse is automatically set to "yes"
-- Modify string to match original format of parameter
if string.match(poly,"^%[.*$") ~= nil then
poly = string.gsub(poly,"(%d)(,)(%d)","%1:%3")
poly = string.gsub(poly,"%],%[",",")
poly = string.gsub(poly,"%[+","")
poly = string.gsub(poly,"%]+","")
poly = string.gsub(poly,",$","")
reverse = "yes"
end
for str in string.gmatch(poly,"([^"..separator.."]+)") do
if reverse == "yes" then
a = str.gsub(str,"%:.*$","")
polyy[index] = tonumber(a)
b = str.gsub(str,"^.*%:","")
polyx[index] = tonumber(b)
dummy = dummy .. b .. "," .. a .. "|"
else
a = str.gsub(str,"%:.*$","")
polyx[index] = tonumber(a)
b = str.gsub(str,"^.*%:","")
polyy[index] = tonumber(b)
end
index = index + 1
end
if reverse == "yes" then
dummy = string.gsub(dummy,"|$","}}")
shape = dummy
end
if shape == "" or shape == nil then
shape = string.gsub(poly,",","|")
shape = string.gsub(shape,":",",")
shape = "{{mapmask|group=mask|" .. shape .. "}}"
end
if index <= 2 then output = output .. "Not enough '''coordinates''' for polygon '''" .. name[1] .. "'''\n"
return output
end
local multi = frame.args['multi'] or ""
if multi == nil or multi == "" then
if markerpage ~= nil and markerpage ~= "" then
multi = grabmarkerinpoly(markerpage,types)
else
multi = ""
end
end
multi = string.gsub(multi,"\n","")
multi = string.gsub(multi,"%s%s+"," ")
if multi == "" or multi == nil then
if frame.args['lat'] == nil or frame.args['lat'] == "" then
output = output .. "----Missing latitude for '''" .. name[1] .. "'''- Provide name,lat,long parameters for single comparison. or multi or markerpage parameters for multiple comparisons\n"
return output end
if frame.args['long'] == nil or frame.args['long'] == "" then
output = output .. "----Missing longitude for '''" .. name[1] .. "'''- Provide name,lat,long parameters for single comparison. or multi or markerpage parameters for multiple comaparisons\n"
return output end
ptx[1] = tonumber(frame.args['lat']) or 1
pty[1] = tonumber(frame.args['long']) or 1
else
index = 1
for str in string.gmatch(multi,"([^"..separator2.."]+)") do
str = string.gsub(str," @","@")
if string.find(str,"@n") == nil then -- Missing name created
str = "@nMissingname" .. str
end
if string.find(str,"@a") == nil then
str = str .. "@a1"
end
if string.find(str,"@b") == nil then
str = str .. "@b1"
end
str = str.gsub(str,"@a@","@a1@")
str = str.gsub(str,"@b@","@b1@")
str = str.gsub(str,"@b$","@b1")
if string.find(str,"@i") == nil then
str = str .. "@i "
end
if string.find(str,"@t") == nil then
str = str .. "@t "
end
if string.find(str,"@w") == nil then
str = str .. "@wWikidata ID"
end
-- build arrays for name, type, lat, lat, image and wikidata
work = str
work = string.gsub(work,"^.*@i","")
work = string.gsub(work,"@.*","")
work = string.gsub(work,"SLASH","/")
work = string.gsub(work,"COLON",":")
images[index] = work
work = str
work = string.gsub(work,"^.*@n","")
work = string.gsub(work,"@.*","")
work = string.gsub(work,"SLASH","/")
name[index] = work
work = str
work = string.gsub(work,"^.*@t","")
work = string.gsub(work,"@.*","")
keeptype[index] = work
work = str
work = string.gsub(work,"@b.*","")
work = string.gsub(work,"^.*@a","")
work = tonumber(work)
ptx[index] = work
work = str
work = string.gsub(work,"^.*@b","")
work = string.gsub(work,"@.*","")
work = tonumber(work)
pty[index] = work
work = str
work = string.gsub(work,"^.*@w","")
work = string.gsub(work,"@.*","")
wikidata[index] = work
-- call getwdcoords - if Wikidata check if lat/long missing - try to get it from Wikidata
ptx[index],pty[index],wikidata[index] = getwdcoords(ptx[index],pty[index],wikidata[index])
if sort == "yes" then
sortit[index] = string.gsub(string.gsub(name[index],"%[%[",""),"]]","")
sortit[index] = sortit[index] .. "@n" .. name[index] .. "@a" .. ptx[index] .. "@b" .. pty[index] .. "@i" .. images[index] .."@w" .. wikidata[index] .. "@t" .. keeptype[index]
table.sort(sortit)
end
index = index + 1
end
end
if sort == "yes" then
for i = 1, #sortit do
name[i] = string.gsub(string.gsub(sortit[i],"^.*@n",""),"@.*","")
ptx[i] = string.gsub(string.gsub(sortit[i],"^.*@a",""),"@.*","")
ptx[i] = tonumber(ptx[i])
pty[i] = string.gsub(string.gsub(sortit[i],"^.*@b",""),"@.*","")
pty[i] = tonumber(pty[i])
images[i] = string.gsub(string.gsub(sortit[i],"^.*@i",""),"@.*","")
wikidata[i] = string.gsub(string.gsub(sortit[i],"^.*@w",""),"@.*","")
keeptype[i] = string.gsub(string.gsub(keeptype[i],"^.*@t",""),"@.*","")
end
end
for i = 1, #ptx do
result = inapoly(polyx,polyy,ptx[i],pty[i])
if ptx[i] == 1 or ptx[i] == nil then ptx[i] = "None" end
if pty[i] == 1 or pty[i] == nil then pty[i] = "None" end
if keeptype[i] == nil or keeptype[i] == "" or keeptype[i] == " " then keeptype[i] = "listing" end
if result == true then
if name[i] ~= nil or name[i] ~= "" then
output = output .. "* latitude: " .. ptx[i] .. " longitude: " .. ptx[i] .. " for '''" .. name[i] .. "'''... appears to be within the polygon...\n"
if marker == "yes" then
-- markertxt = markertxt .. "\*".. i .. ". {{marker | type=listing | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
if oporigtype == "yes" or oporigtype == "both" then
markertxtyes = markertxtyes .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. "| name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
elseif oporigtype == "no"and oporigtype == "yes" then
markertxtyes = markertxtyes .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. "| name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
else
markertxtyes = markertxtyes .. "\*".. i .. ". {{marker | type=listing | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
end
end
else
if marker == "yes" then
-- markertxt = markertxt .. "\*".. i .. ". {{marker | type=listing | name=NoName" .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
if oporigtype == "yes" or oporigtype == "both" then
markertxtyes = markertxtyes .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. " | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
elseif oporigtype == "no" or oporigtype == "both" then
markertxtyes = markertxtyes .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. " | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
else
markertxtyes = markertxtyes .. "\*".. i .. ". {{marker | type=listing | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
end
end
output = output .. "* latitude: " .. pty[i] .. " longitude: " .. pty[i] .. " ... appears to be within the polygon...\n"
end
else
if name[i] ~= nil or name[i] ~= "" then
output = output .. "* latitude: " .. ptx[i] .. " longitude: " .. pty[i] .. " for '''" .. name[i] .. "'''... appears '''not''' to be within the polygon...\n"
if marker == "yes" then
-- markertxt = markertxt .. "\*".. i .. ". {{marker | type=vicinity | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
if oporigtype == "yes" or oporigtype == "both" then
markertxtno = markertxtno .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. " | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
elseif oporigtype == "no" or oporigtype == "both" then
markertxtno = markertxtno .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. " | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
else
markertxtno = markertxtno .. "\*".. i .. ". {{marker | type=vicinity | name=" .. name[i] .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" ..string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
end
end
else
output = output .. "* latitude: " .. ptx[i] .. " longitude: " .. pty[i] .. "... appears '''not''' to be within the polygon...\n"
if marker == "yes" then
-- markertxt = markertxt .. "\*".. i .. ". {{marker | type=listing | name=NoName" .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .."}}\n"
if oporigtype == "yes" or oporigtype == "both" then
markertxtno = markertxtno .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. " | name=NoName" .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
elseif oporigtype == "no" or oporigtype == "yes" then
markertxtno = markertxtno .. "\*".. i .. ". {{marker | type=" .. keeptype[i] .. " | name=NoName" .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
else
markertxtno = markertxtno .. "\*".. i .. ". {{marker | type=vicinity | name=NoName" .. " | lat=" .. string.gsub(ptx[i],"None"," ") .. " | long=" .. string.gsub(pty[i],"None"," ") .. " | image=" .. images[i] .. " | wikidata=" .. string.gsub(wikidata[i],"Wikidata ID","") .. "}}\n"
end
end
end
end
end -- ENDFor Loop
-- markertxt,_ = string.gsub(markertxt," - $","")
markertxtyes,_ = string.gsub(markertxtyes," - $","")
markertxtno,_ = string.gsub(markertxtno," - $","")
map = ""
if mapframe == "yes" then
if ptx[1] ~= "None" and pty[1] ~= "None" then
map = '{{mapframe|align=center|height="500"|width="850"|' .. ptx[1] .. '|' .. pty[1] .. '|layer=MS|zoom=7|show=listing,see,do,buy,eat,drink,sleep,around,city,view,site,other,go,vicinity,mask,gold,lime,magenta,mediumaquamarine,orange,plum,red,silver,unknown|name=Inapoly Test}}' .. "\n" .. shape
elseif makebox ~= nil and makebox ~= "" then
local latx = string.gsub(makebox,",.*$","")
local longy = string.gsub(makebox,"^.*,","")
map = '{{mapframe|align=center|height="500"|width="850" | ' .. latx .. '|' .. longy .. '| layer=MS|zoom=7|show=listing,see,do,buy,eat,drink,sleep,around,city,view,site,other,go,vicinity,mask,gold,lime,magenta,mediumaquamarine,orange,plum,red,silver,unknown|name=Inapoly Test}}' .. "\n" .. shape
else
map = '{{mapframe|align=center|height="500"|width="850"|' .. polyx[1] .. '|' .. polyy[1] .. '|layer=MS|zoom=7|show=listing,see,do,buy,eat,drink,sleep,around,city,view,site,other,go,vicinity,mask,gold,lime,magenta,mediumaquamarine,orange,plum,red,silver,unknown|name=Inapoly Test}}' .. "\n" .. shape
end
else
map = ""
end -- END MAKE A MAPFRAME WITH MAPMASK
if marker == "no" and text == "yes" then
return map .. "\n----\n" .. output
end
if marker == "no" and text == "no" then
return map
end
if marker == "yes" and text == "no" then
if markermatch == "yes" then
return map .. "\n----\n" .. markertxtyes .. "\n"
end
if markermatch == "no" then
return map .. "\n----\n" .. markertxtno .. "\n"
end
if markermatch == "both" then
return map .. "\n----\n" .. markertxtyes .. "\n----\n" .. markertxtno
end
end
if marker == "yes" then
if markermatch == "yes" then
if text == "yes" then
return map .. "\n----\n" .. markertxtyes .. "\n----\n" .. output
else
return map .. "\n----\n" .. markertxtyes
end
end
if markermatch == "no" then
if text == "yes" then
return map .. "\n----\n" .. markertxtno .. "\n----\n" .. output
else
return map .. "\n----\n" .. markertxtno
end
end
if markermatch == "both" then
if text == "yes" then
return map .. "\n----\n" .. markertxtyes .. "\n----\n" .. markertxtno .. "\n----\n" .. output
else
return map .. "\n----\n" .. markertxtyes .. "\n----\n" .. markertxtno
end
end
else
return map .. "\n----\n" .. markertxtyes .. "\n----\n" .. markertxtno .. output
end
end
return p